2 Zones Fire Alarm Control Panel, Mini Fire Alarm Control System

Features:

Four Style B (Class B) Initiating Device Circuits (IDCs).
A Master Panel also has two zones, each zone can connect up to 25 conventional detectors.
A slave Panel has two zones, each zone can connect up to 25 conventional detectors.
The Mater panel can show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
Master panel has 4 digital LED display to show slave number and status.
2 Detection Zones Panel, 25 Detectors per Zone
Fire 1 relay would be activated when a zone alarms.
Fire 2 relays would be activated after a 30-second delay when two zones alarm.
1 Sound relay output for sound alarm
1 Fault relay output for fault
Zones Fire and Fault LEDs indication
Fire1, Fire2, Sound relay outputs can be activated manually
RS485 Port for repeater up to 1.2Km
Up to 31 Slave panels can be connected to a Master panel
Powered by outside DC22-26V power supply
End Of Line Status Detection, short circuit / open circuit detection
Two modules power supply could be selected.
The power supply input is AC110-270V
Two 4AH batteries can be housed in the power booth
Relay output contacts rated at: 2.0 amps @ 30 VDC.

Specifications:

Primary AC: 120VAC 50 / 60Hz power supply rating 240VAC 50 / 60Hz
Power supply rating: 2 Amps @ 24VDC
Maximum Battery Charging Current: 0.98 Amps @ 26VDC
Initiate Device Circuits 2 Zones: Alarm Zone 2
Normal Initiate Operating Voltage: 23VDC, Maximum 26VDC, Regulated
Normal Quiescent Current (normal state): <50mA
Alarm Current (not the others): <150 mA
Short Circuit Initiate Current (per zone): 35mA Maximum
Maximum Initiating Resistance (per zone): 10 ohms
Initiating End-of-Line Resistance: 4K7 ohms, 1 / 2W 5%
Standby Detector Current (per zone): 4mA maximum
Maximum Detector Count (per zone) : 30 Detectors
Initiate Cabling Type: 18AWG Twisted Shielded Pair (14 - 18 AWG)
Detector Base Impedance: 430 ohms
Notification Device Circuits: 1 Nac, Special Application
Maximum NAC Current Rating: 1 Amp maximum per circuit
NAC Operating Voltage: 26VDC Nominal, 30VDC Maximum
NAC End-of-line Resistance: 1N4007 Diode
FAULT Relay Rating: 2A & 30VAC, Resistive
Alarm (Extra) Relay Rating: 2A & 30VAC, Resistive
Slave alarm panel: LED display only

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.