Small Fire Alarm Control Panel, Fighting Slave Controller Facp

Features

The panels have the following key features:
conventional input zones.
notification appliance circuits (NAC) with built-in synchronization for ANSI 3.41and Gentex.
The panel comes with a 2 amp power supply.
 Dedicated alarm and trouble relays.
1 RS485 can be able to connect the other panel.
Housed in a 205mm W x 258mm H x 81mm D metal enclosure.
Enclosure supports two 12V, 4Ah backup batteries.

Specifications

Primary AC : 120VAC 50/60 Hz  Power supply rating 240VAC 50/60 Hz 
Power supply rating :  2 Amps @ 24VDC
Maximum Battery Charging Current :  0.98 Amps @ 26VDC
Initiating Device Circuits 2 Zones:  Alarm Zone 2
Normal Initiating Operating Voltage:  23VDC, Maximum 26VDC, regulated
Normal Quiescent Current (normal status):  <50mA
Alarm Current (not include the others)? <150 mA
Short Circuit Initiating Current (per zone)? 35mA Maximum
Maximum Initiating Resistance (per zone)? 10 ohms
Initiating End-of-Line Resistor? 4K7 ohms, 1/2W 5%
Standby Detector Current (per zone)?4mA maximum
Maximum Detector Count (per zone)?30 detectors
Initiating Cabling Type?18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance?430 ohms
Notification Appliance Circuits?1 NACs, Special Application
Maximum NAC Current Rating?1 Amp maximum per circuit
NAC Operating Voltage?26VDC Nominal, 30VDC Maximum
NAC End-of-line Resistor?1N4007 Diode
FAULT Relay rating?2A & 30VAC, resistive
Alarm( Auxiliary ) Relay rating?2A & 30VAC, resistive
Slave alarm panel?LED display only

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.