Tenda W6-s 300mbps 2.4g Wireless Panel Ap Indoor 86 Type Wall Wifi Ap Wireless Access Point Poe Power Supply

Feature:

Independent RF chip design, special accurate coverage signal optimization, can cover 2 rooms without dead angle:
W6-s is designed with an independent radio frequency chip, which separates the power supply part and WiFi signal processing part, completely avoiding the interference of a powerful magnetic field on the signal. It is equipped with a high-performance antenna to ensure that no blind spot covers two parallel rooms of the hotel.
High performance wireless 300Mbps low latency, smoother game and video:
The W6-s wireless rate can reach 300Mbps, which can meet more device access. With the application of packet simultaneous retransmission optimization technology, the Ping delay reduced by 30%, the web page can be swiped in seconds, the game can be played quickly, and online video can be smoother.
Standard Poe power supply makes equipment upgrading and construction easier:
The standard Poe power supply is adopted without an external power supply. Each AP only has one network cable to transfer data and power at the same time. The maximum power supply distance can reach 100m, without the original power line layout. Especially for hotels and families, as long as the network cable is deployed, the equipment can be replaced and the construction is convenient.
LED soft light processing and switchable design, less radiation, create green and healthy life:
According to the characteristics of the home networking coverage environment, we have identified the dynamic environment of the signal and automatically adjusted the coverage signal. After the authoritative electromagnetic radiation test, W6-S is 1/3 the radiation of the ordinary router. In addition, the LED light is soft light processing, and the switch of the LED light can be set to enhance the use experience of the hotel, bedroom and other environments.
86 design, replace the traditional network cable connection, fashionable appearance design, beautiful installation:
The shell is made from high-quality imported materials and processed with mirror technology. It is noble and elegant. The thickness of the top cover is only 10mm. It is the same height as other switch panels in the room and integrates harmoniously with different decoration styles.
Support unified management of wireless controller, easy installation and flexible configuration:
W6-s supports the unified management and configuration of Tenda wireless controller M3 or router with AP management function. You can manage all w6-s in a unified way. At the same time, we also support automatic configuration distribution. When you have a new W6-S in the LAN environment, you can install it without any setting at all.

Specification:

Hardware:

Operating frequency band: 2.4G
Wireless protocol standard: IEEE 802.11b / g / n
Ethernet interface: 2 pcs 10 / 100BaseTX ports
Reset key: 1 reset key
LED light: 1 SYS light
Power consumption of the entire MAChine: 4.6w under full load
Power supply mode: Standard Poe AF

Software:

Working mode: AP, client + AP
Switch LED: support
Diagnostic tool: Ping
Timed restart: supported
Cycle restart: supported
Device management: Web Management
Log function: view system log
Software upgrade: support local and AC controller upgrade software
Device restart: supports local and AC controller restart
Restore factory settings: support local and AC controller reset
Configuration backup: support
Configuration restore: supported
Wireless controller management: supports M3 and Tenda routers with AC management function

Wireless:

Access rate: 1-300Mbps
SSID: supported
Number of Ssid: 2
WEP encryption: support 64 / 128 bit encryption
WPA-PSK encryption: AES / TKIP
WPA2-PSK encryption: AES / TKIP
WPA encryption: supported
WPA2 encryption: supported
Wireless access control: support MAC address based filtering
Adjustable transmission power: support
AP isolation: support
User limit: supported
Weak signal client access limitation: support
WMM: support
VLAN and SSID binding: supported
802.11b reception sensitivity: - 90dbm
802.11n (HT20) reception sensitivity: - 70dBm

Others:

Operating temperature: - 10 ? to 45 ?
Working humidity: 10% - 90 % RH (non-condensing)
Storage temperature: - 30 ? to 70 ?
Storage humidity: 10% - 90% RH (non-condensing)
Application scenario: WiFi coverage of large family / Villa / hotel room
Color: white
Size: 86 * 86 * 35mm / 3.38 * 3.38 * 1.37 ''


Includes:

1 X Wireless Panel AP
1 X Installation Manual
2 X Screws

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.