Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter and SS Fitting

Specifications:

• Power source: DC 12V
• Rated current: 0.7A
• Low noise: 30db at 1 metre
• Service life: 30000 hours up
• Inlet/Outlet: 1/2" male thread. Fit both 1/2" NPT and BSP female thread.
• Max Flow Rate: 600L/H
• Max Water Head: 3.8 metre
• Max system pressure: 10Bar(145PSI). This doesn't mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
• Max circulating water temperature: 100°C/212°F.
• The circulation pump is a non-self-priming pump (0 Suction Height).

Usage:

• The water pump cable (red line is positive, do not take the wrong) received a suitable power supply (the battery can be a battery, it can be a power converter), and then a good water pipe, then pumps into the water, Can be used normally.

Note:

• Do not take the wrong pump positive and negative.
• Prohibit not through the power converter will be connected directly to the 220V power supply pump.
• Is strictly prohibited for strong acidity, alkali and other damage to the pumped medium.
• Can't be immersed in hot water exceeding 50°C/122℉

Package includes:

• 1 x Solar Water Pump
• 1 x AC-DC Adapter
• 2 x 9mm SS Hose Barbs
• 2 x SS Worm Clamps