Dual-channel 24-bit A/d Conversion Weighing Sensor With Metal Shied

Features:
Voltage :4.8-5 .5 v
Current:
1.6mA
Dimensions:
1.7cm * 2.9cm * 0.4cm
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
With metal shielding , Strong anti-interference ability.
Two selectable differential inputs.
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
Automatic power on reset circuit. simple digital control and serial communication :
All are controlled by the input pin , the chip registers without programming.
selectable output data rate of 10Hz or 80Hz. simultaneous rejection of 50Hz and 60Hz power interference.
Specifications:
Usage:
A/D Conversion Weighing Sensor Module


Material:
Mixture


Type:
Vacuum Sensor


Output:
A/D Conversion Weighing Sensor Module


Model Number:
HX711 Dual-channel 24-bit A/D Conversion Weighing Sensor Module

Note:
Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol

GARANCIJA

Denar vam bomo vrnili, če artikel ni bil dostavljen v 40 dneh po nakupu. Za vračilo kupnine imate na voljo 2 tedna - do 60. dne.
Izdelek se ne ujema z opisom? Pišite nam v 30 dneh po prejemu!
V primeru preklica bo denar vrnjen na vaš račun v roku 3 dni.