Programmable Electronic Fire Control Module
SKU #6709396504612
Tip: Circuit Development Boards
Dostupnost: Na lageru
Cijene počevši od: $ 169.19
BESPLATNA BESPLATNA DOSTAVA PO SVIJETU
Features:
This electronic fire control module is a programmable electronic fire control module designed for the water gel beads No. 2 gearbox.
It has a variety of personalized programmable functions such as ladder return, single-stroke double-stroke, and multiple bursts. In addition, it also has low-voltage battery protection and gearbox stall protection functions, which can effectively improve the stability, rate of fire, and response speed of the gearbox At the same time, it can completely eliminate the problem that the gearbox becomes more frequent.
The module uses a maximum of 14.8V battery, which needs to be soldered and wired by yourself
Size:
45 x 30 x 14mm, working voltage:
7.4v-14.8v
Programmable Multiple Shooting Modes:
safe mode, which is the same as the original. Under the action of the gearbox thrust rod, the switch release cannot be pulled. SEMI mode. This mode can be programmed to achieve single shot, double stroke single shot and 3 to 6 consecutive shots. The default is single shot. AUTO mode. This mode can be programmed to achieve bursts, 3 bursts, 6 bursts, and 9 bursts. The default burst is
Supports up to 240A starting current and 100A braking current
No. 2 gearbox suitable for the standards of XWE M4, JM Gen.9, FB, Kublai, Jingji, and Jiqu
Full light sense without contact and wear, with silver-plated wire set and plug connector; support adjustment of trigger sensitivity and AUG mode
Specifications:
Material:
Nylon + Electronic Components + Wire Rod
Product Weight:
90g
Package Dimensions:
16 x 16 x 4cm
Package Weight:
100g
Packing:
Box
Package Content:
2 x Fire Control Module
2x Manual
2x Component Pack
Proizvod ne odgovara opisu? Kontaktirajte nas u roku od 30 dana nakon što ga primite!
U slučaju otkazivanja, novac će biti vraćen na vaš račun u roku od 3 dana.
This electronic fire control module is a programmable electronic fire control module designed for the water gel beads No. 2 gearbox.
It has a variety of personalized programmable functions such as ladder return, single-stroke double-stroke, and multiple bursts. In addition, it also has low-voltage battery protection and gearbox stall protection functions, which can effectively improve the stability, rate of fire, and response speed of the gearbox At the same time, it can completely eliminate the problem that the gearbox becomes more frequent.
The module uses a maximum of 14.8V battery, which needs to be soldered and wired by yourself
Size:
45 x 30 x 14mm, working voltage:
7.4v-14.8v
Programmable Multiple Shooting Modes:
safe mode, which is the same as the original. Under the action of the gearbox thrust rod, the switch release cannot be pulled. SEMI mode. This mode can be programmed to achieve single shot, double stroke single shot and 3 to 6 consecutive shots. The default is single shot. AUTO mode. This mode can be programmed to achieve bursts, 3 bursts, 6 bursts, and 9 bursts. The default burst is
Supports up to 240A starting current and 100A braking current
No. 2 gearbox suitable for the standards of XWE M4, JM Gen.9, FB, Kublai, Jingji, and Jiqu
Full light sense without contact and wear, with silver-plated wire set and plug connector; support adjustment of trigger sensitivity and AUG mode
Specifications:
Material:
Nylon + Electronic Components + Wire Rod
Product Weight:
90g
Package Dimensions:
16 x 16 x 4cm
Package Weight:
100g
Packing:
Box
Package Content:
2 x Fire Control Module
2x Manual
2x Component Pack
JAMSTVO
Vratit ćemo vam novac ako artikl nije isporučen u roku od 40 dana nakon kupnje. Imate dva tjedna da zatražite povrat novca - do 60. dana.Proizvod ne odgovara opisu? Kontaktirajte nas u roku od 30 dana nakon što ga primite!
U slučaju otkazivanja, novac će biti vraćen na vaš račun u roku od 3 dana.
RECENZIJE
Fast To Try But Arrived 01 Jun 2021 13:50
V***x from ITALY